You are currently viewing Treat Your Mixer Grinder Right
Images of Mixer Grinder by Mixiwale

Treat Your Mixer Grinder Right


A mixer grinder is probably the most important machine in a modern kitchen, helping reduce manual work and saving time to allow faster cooking. From pureeing, mixing, grinding, mincing and chopping, we designed the mixer grinder for multiple tasks and gave a fine product without simple pieces.

From our grandmothers using a grinding stone, spending precious time, energy and effort manually for cooking, to these modern, technically superior mixer grinders that perform the mixing, blending and grinding functions in minutes, kitchen appliances have surely come a long way in terms of technological advancement. 

However, these machines will never replace humans, and one key factor that prevents them from doing so is their tendency for failure. Dealing with technology can always be a little cumbersome and frustrating for a common individual.

Common Problems But Not So Common Solutions 

Mixer Grinders are without a doubt one of the most used appliances in a kitchen daily, and this obviously makes it one of the most crucial instruments in a modern kitchen.
Here we’ll be explaining some of the common problems faced by most mixer grinders and their solutions.

1. Mixer shuts down

We may end up loading the mixer jars more than their capacity or might load them with boiling ingredients. We designed the mechanism in the mixer to ensure the safety of the mixer and user, so post encountering an overload instance, it usually shuts off.
These resets are pretty common among electrical appliances, and here’s what you can do to make it right:

Unload the jar and let the mixer cool down for a while.

Run the mixer after some time with an empty jar once.

Perform the job in batches. For instance, divide the number of vegetables.

Ensure you do not overrun the mixer and give it a halt for 5 minutes at least before loading another batch.

2. Blunt Blades:

Over time, extensive usage can lead the blades to be blunt and we know that this is the most prevalent issue which can be resolved in no time.

Grind rock salt in the mixer, run a couple of batches. Ensure you do not overload the mixer. Visible changes will be clear even while you are grinding the rock salt. This is a good practice to be followed carefully and regularly.

3. Loose Blades:

The quality of the mix could be impaired because of loose blades as well. It could also be a problem if the coupler is faulty or loose.

You might just need a screwdriver to fix it or rotate the coupler but, If the problem persists, we suggest you consult a technician or, better still, you can call us at our helpline number for a one-stop solution and we will be more than happy to assist you.

4. Leakage:

Often, the salt and water from the jars seep into the machinery whenever they come in contact. This could be fatal as well as it can lead to electric shock as well.

To avoid this, you might have to check your jars for leakage first. Then put some oil in the parts of machinery that come in contact with the jar and suspend them upside down for a while.

5. Buttons getting stuck:

Food particles can run havoc on any part of the machinery. Buttons also get damaged or stuck if good particles get spilt over them or seep into the empty spaces.

Thes best remedy is to always clean your mixer thoroughly after every use. You can use a toothbrush or a painting brush to reach the empty spaces and clean thoroughly to ensure that food particles are not affecting the working of the buttons.


Though mixers are the life lifeline of any kitchen, we often take them for granted until all hell breaks loose, i.e. they stop working and therefore it is advisable to exercise certain care and love by following certain simple steps:

They can use electronic items efficiently and can have a longer shelf life if you follow the directions for use and maintenance properly without being lazy. It’s the job of the manufacturer and the retailer to provide these instructions clearly and understandably.

One thing that’s quite common in a kitchen and is used regularly is a mixer grinder. And, the most used things are the ones that need a lot of upkeep. Here are some quirky ways to clean your appliance–

Lemon peels:

Got some leftover lemon peels? Don’t throw them just yet. All you have to do is rub the peels inside and on the lid of the mixer. Let it sit for a while so it can work its magic. Voila! You have a clean, odour free appliance.

Baking Soda:

We can use this in almost everything. You don’t even have to go out and buy it especially as I’m sure it must lay around in your house. Make a paste using some baking soda n water, apply thoroughly. Rinse after 15 minutes.


To remove the stains left on the walls of the grinder because of daily use, vinegar can really help you out. Put 2 tablespoons of vinegar and some water in the grinder, grind it away.

These were some ways to keep your appliance clean. Now let’s talk about how to maintain it for smooth services.

  1. Make sure that your lid is tightly closed before every use.
  2. Keep it in a place you know it won’t fall from.
  3. Don’t grind hot ingredients as it may cause damage to the machine and,
  4. Always go with the low medium and then high speed, to reduce the pressure on the motor.

It is therefore advisable to avoid these common mistakes which happen now and then which harm your machine’s potential life expectancy.


We at mixiwale understand the problems a common household faces and that is why we bring to you our Mixer and other Kitchen Appliances Repairing Services now operational in Delhi NCR Region. So next time you have a problem, feel free to contact Mixiwale and find a one-stop solution for all your problems.

Best Mixer Grinders

 Here at Mixiwale, we understand every household has its own personalised need and to cater to those needs in the most satisfying way, we offer you one of the best mixer grinders in India. On order straight from our website, fit the needs of every household with our Mixer Grinders

HANS Commercial Mixer/Grinder DominarPro 1800 Watts



  • Very Powerful 1800 Watts Turbo Power Motor.
  • Double coated High-Grade Copper Winded Motor which generates high RPM (23000 Approx) and high Torque to get going in any grinding situation.
  • Self Lubricating MSP Bushes in Motor and Jars for Smooth trouble-free running for Years.
  • 60 mins. Continuous running – for longer life of the product.
  • Dominar Pro has Power – On LED indicator for safety.
  • Cutter blades are made of high tensile stainless steel and machined in exact shape at precise angles for best performance.
  • Equipped with a tripping mechanism to protect from overload.




  • 3 litre stainless Steel Blender Jar
  • Small Stainless Steel Dry Grinder
  • With Ball Bearing, Powerful Motor
  • 6 months Motor warranty

HANS Commercial Mixer/Grinder DominarPro 2200 Watts


  • Features: Most Powerful 2200 Watts Turbo Power Motor.
  • Double coated High-Grade Copper Winded Motor, which generates high RPM (23000 Approx) and high Torque to get going in any grinding situation.
  • Self Lubricating MSP Bushes in Motor and Jars for Smooth trouble-free running for Years.
  • 60 mins. Continuous running – for longer life of the product.

For More Options of such Amazing Mixer Grinders please visit our website by clicking here.

Shopping At Mixiwale

As mentioned above, we have incorporated Repairing Services for Mixer Grinders, so feel free to contact us and seek our services in the Delhi NCR Region. In any case, if you feel unsatisfied with the product’s condition or working, we provide you with an extremely hassle-free return policy. You may return the product at the time of delivery itself without wasting any time.

 That being said, we offer you the best in class service in terms of quality and assurance with service complements such as

  •  Unboxing at your doorstep 
  •  Delivery in 48 hours 

Leave a Reply